Видео

what type of motor and gear reduction? what do you have for a water swivel?

What typa yeast

Zero coverage will reduce the retirement revenues of those that retire early. This by the cost of the advantage plan.

Medicare does not consider VA care does not provide credible coverage. You cannot use Medicare and VA together.

Or possibly to fast pushing mill

Dust on track

Ordered a new carburetor, be here tomorrow. I'm pretty sure its the jets like you said. I really like the down home, no nonsense approach you take. I'll let you know how it goes. Great video!

I use a table spoon in a 5 gallon bucket.

I hooked a shop vac to my oil fill when I changed my hydraulic fluid. It helps prevent all that fluid loss.

Someone stole my wild thing when they vandalized my and others paid storage unit. I hope it will never start again.

Very helpful. Thank you.

@Larry Sbrusch, I own a Moto Droid Turbo 2 and at the time of my purchase on Ebay, I had earlier found out that this model was considered a mid tier flagship model and so for the money i was about to spend, I had found it for about 95 smackers, so I jumped all over this deal and have never really put it into service as a working phone service. Instead, I chose to use it as a personal assistant, a phone to keep my music stored on since it has bluetooth that can easily be made active and occasionally watch YT videos. That's not to say that I also have special apps installed such as Brave Browser, Privacy Browser, 1 Weather, space weather, Disaster Radio, OSM Dashboard, Trail Sense Compass that is also loaded with a ton of additional essential measuring and overall encompassing sub apps such as inclination declination calculator, pitch angles, triangulating location, climate, clouds, navigation and Beacons, lightning strike distance, temperature estimation and astronomy as a whole! But this is not all that is readily downloadable for your phone from F-Droid! There's also additional apps that I also secured from F-Droid as well OSM Mapping which is open sourced, Suntimes, Suntimes Alarm, Velocity Calculator, FM Radio, Open Recipes and Shopping List. The overwhelming majority of these apps are sourced from F-Droid which is a trusted and vetted source, which is open sourced provider hosting site that I have along with perhaps at least 10's of thousands of people that use these apps and the developer's and maintainers of these apps are top's with me and garner privacy focus as a whole, for all people to use and are damned good at what they do, so I thought that I would pass this along to you Larry! These apps are free to use and although these app developers and maintainers seek donations to help their cause and to keep these projects going because of time intensive measures that are put into the making of these apps. These apps are VERY worthy to have on your phone and are not resource hogs that will NOT drag your phone down provided that you are not trying to run a large horde of them all at once while some of them continue to run in the background, willy-nilly! I also have a Motorola E6 that has limited amount of 16 GB storage and only 2 GB of memory and yet with one hefty app over and above and all of the above mentioned apps, my phone does not struggle yet I still have to charge my phone daily instead of every 2-3 days. The Moto Droid 2 however is a solid workhorse that will run circles around the Moto E6 2020 though and you can load a 32 if not 64 GB SD Card into it and just go ape on just about anything that you are going to throw at it! The only complaints that I have had with the Droid 2 is the ultra crappy speakers and sometimes with the charging of the battery is that it has a tendency to get too warm if not hot and so that is why I face the display part face down when attempting to charge the phone just so the heat has a chance to dissipate the heat. A battery change can a little bit tricky trying to get the textured grain backing off to get at the battery which is also buried down into the layers but is not impossible to do. The textured grain back cover is glued in place and if you heat it up a bit with a hair dryer but not to the degree of scorching hot, you can coax it off with a very slender plastic plastic tool that is provided when you buy the exact replacement battery or equivalent but when you buy one, just make sure that you have the toolkit included with you purchase. These batteries are readily available on Ebay primarily although Amazon may stock these as well! If the battery that you select should not have a toolkit, you can look for this specific toolkit on Ebay that is titled as such....Cell Phone Tablet Repair Opening Tool Kit Set Pry Screwdriver For Iphone Samsung and then select in the drop down box the 13 piece Opening tools kit for $9.59. The battery for your Droid 2 on Ebay is...FB55 New Battery for Motorola XT1585 Droid Turbo 2 XT1581 X Force SNN5958A and the seller is "Square Circuit" for $10.99. This battery appears to be an original OEM although it doesn't have Motorola stamped on it AND it has a date code of 2019 which isn't the most in so far as a freshness date, unless it is well maintained as far as charge and most adequate proper storage! It is backed by a 30 return policy and for you as it's original owner of this Droid Turbo 2, you already know of it's charging characteristics and how well your phone will operate over the period of days. I hope that all of this helps in your quest of continued ownership of this very decent phone!! ALSO, in order to download these apps that I mentioned, you need for the F-Droid installer app, first and foremost, because it is your package management installer and also helps make sure that you get your app updates when they become available and so when opening this app in the months that go by, it will actually notify you that the apps updates become available. BUT, if you place the F-Droid installer icon on your home portion of your display screen, when these updates are avail, a blue dot appears over the icon, it will let you know almost immediately! You can drag that icon from your app drawer when you klick on the apps icon to open the apps drawer and then drag that icon onto the home screen and place it where it is best suited for you.

After you drill How do you keep the water bearing sands from caving back in before you can get your casing or sand screen down?

the little side clips aren't going back into place??

Where can I find this?

Newbie here, literally waiting for my still to arrive. I do have a question... With cracked corn I've noticed that some people grind it up and well you don't. Is there a difference. You have one of the best videos out there. You don't assume that your viewers know what your doing so you explain it very, very well. Though I'd say an experienced distiller wouldn't watch all your video but I thank you for your time and help

I doubt a dash cover will work on my son's 2007 Silverado because his dash is severely cracked, but I don't really want to replace the entire dash. Lol

I joined the military with a medical waiver for my hips, does that mean it won’t be a 0% rating for my hips upon joining? Or does that justify 0% upon joining?

this must be the BEST instructional video! Thanks!

Larry can you send me an email, id love to get some info

Great video, thanks for sharing with us

I have one of those stills. I changed the tubing to 3/4 and the leaking stopped.

I have never heard anything about providing financial documents from my experience...not through my experience or other videos I have watched and i have watched 100s.

Hey Larry. Is it correct that the cracked corn is sold as animal food? Guess that’s fine to use yes?? Or is there a more clean kind for human consumption?

Not being an ass lol. just trying to help . I hope by now you realize , you went about this All Wrong. Sand by hand and with the grain Always with this..No Orbital!! .. Burning gets rid of the softer wood in each after wire brushing. After that remove as much of the char as possible to expose the raised grain "because the softer was burnt / removed"...when you sand , its only to hit the raised grain!! Then you still need to clean any char left with rag , brush etc....even a lil water "spray bottle"....next stain , seal etc to your liking. Hope this helps

My favorite color

Why do some videos show opposite before carburetor? And they work? Well My Homelite 2 works how you say

clear, direct, accurate, factual - ding ding ding - folks we got us a winner here……. Thank You Much

Great job. Amazing.

I found that using a small, pocket screw driver helped with getting the pull rope into hole.

How do replace the whole assembly

I have this same Husqvarna trimmer mower and it ran great till today it won’t start. Has fuel, spark and compression just won’t start. Also could you take a pic of the governor spring how it’s mounted. Mine came off and had to replace it but can’t find anything on how or where it attaches from the governor.

More than likely the blade getting pinched getting hot the cutting face gets hotter than the spine causing it to bow and the blade cant track straight

Turn the log around. The knot/hard side should be AWAY from the entrance of the blade. In your pic you want the blade to run bottom to top, not top to bottom (which it looks like it was). The earlier the blade path is deformed by resistance, the more of an effect it has on the remaining path (width of board).

I always go slow and keep my bands sharpened... but still happens sometimes... make sure your teeth ain't more than a quarter inch past pulley... God bless

Feeding too fast. If the gullets fills with saw dust, the blade will wander in the cut.

Time for a new blade or at least time to resharpen

Great video Larry - thank you.

Sooo many and sooo 😍 cute❤

Needed some explanation for windshield bike. Didin't knew how it works : Thanks very much for explanation!!

I’m in a chair and once they actually re diagnosed me from far away. They decided without a visit , interview or actual physician they said I’m no longer paralyzed and stopped all benefits. Awesome

they don't want you to have a rating. then they would have to pay you.

It's legal here in New Zealand, as long as you aint selling it, thanks for all the tips old fella, appreciate the knowlege

Great job. Thanks for the video. It helped me understand what was wrong in mine.

Would have been helpful to know where to fill it.

Oh yeah, I like that still. Good job Larry!

Great one. I believe when there's whistling sound, it's either the cutting tool is not sharp enough or is not cutting in the perfect angle

Just got one ! Same one Thank you !

Nice

I listen on headphones and the background noise is too much for me. Gave you a thumbs up for your effort anyway.